Accessories for Shielded Doors

Ray-Bar Lead Lined Cylindrical Lever Locksets (Complete)

Available as Locking or as Passage Lead Lined Lever Locksets. Ray-Bar utilizes one of the toughest cylindrical locks for heavy-duty medical,hospital,commercial or industrial applications. Entrance function Extra Heavy Duty commercial cylindrical "Rhodes style" lever. ANSI Grade 1 locks designed for use in hospitals and universities that meet or exceeds 800,000 cycles. Specifically built for heavy duty applications.

  • Standard "Satin Chrome" Finish
  • UL/ULC Listed for up to 3-Hour Fire Doors per USA and Canada UL Standards
  • Available 1/32" (2#) 0.8mm or in 1/16" (4#) 1.6mm internal lead shielding
  • Typically available in approximately 5 to 7 working days
  • Non Handed, Easily Reversible
  • Backset-2-3/4" standard. The backset is the distance from the edge of the door to the center of the 2-1/8-inch bore hole in the face of the door.
  • Fits Door Thickness Range of 1-5/8" up to 2-1/8" thick.
  • ADA-compliant "Rhodes" style levers.
  • Meets or exceeds A156.2 Series 4000, ANSI Grade 1
  • Meets or exceeds 800,000 cycles
Lead Lockset

Lead Lined Lockset 

Lead Lining of Customer-Supplied Locksets

Lead lining of door hardware is for mortised or lever locksets, closer covers and other devices. They are available in 7 lead thicknesses.
Available as a service of Ray-Bar internally lead lining your cylindrical or mortised lever lockset with a typical 2 business day turn around after received from customer.
Optionally Ray-Bar offers the following 2 types of lead lined cylindrical lever locksets complete as a package,boxed and shipped directly to customers location via UPS

Lead Lined Light Proof Door Louvers

Lead Lined Light Proof Door Louvers

Lead Lined Light Proof Door Louvers

Fabricated with 18 gauge steel, painted non-reflective flat black with lead lining as specified by customer. Ray-Bar lead lined light proof louvers will fit in doors from 1-3/8" thick to 1-3/4" thick, and provide a complete overlap for radiation shielding and 20% air flow.

Frame Lead Lining Kits

Frame Lead Lining Kits

Frame Lead Lining Kits

Lead lining kit made to fit most hollow metal or aluminum frame profiles, available in 10 lead thicknesses. Available as either "flat" lead kit or as pre-formed profile to fit most typical hollow metal frames.
Lead lining must be installed by customer internally inside frame throat on same side of frame as radiation room x-ray source side.
Customer must order lead lining thickness as the same or greater as the lead in that wall or partition that frame occurs in.(As Required Per NCRP #49 and #147)

Ray-Bar Lead Lined Vision Lite Frames

wooddoor2.jpg

Lead Lined Vision Lite Frame

  • 8 standard sizes (Custom sizes available)
  • Includes Impact Resistant X-Ray Safety Glass
  • Fits 1-3/4" thick lead lined doors
  • Many protective shielding levels available
  • Typically ready to ship in only 3 to 5 working days
  • Fire-rated frames carried in 3 standard sizes up to 90min.
  • Custom sizes also available

Ray-Bar’s Lead Lined Vision Lite Frames are fabricated with 18 gauge cold-rolled steel with baked enamel or powder coated color finishes, mitered corners and internal lead lining to specified shielding requirements. The x-ray safety glass is permanently labeled and meets ANSI Z97.1 and CPSC 16 CFR 1201 CAT 2 for impact resistance requirements.

Stock sizes: 8x10, 10x10, 10x12, 12x12, 12x16, 16x16, 18x18, 18x24, 18x30, 18x36, 24x24, 24x30, 24x36 and 36x36 are promptly available and ready to ship. Custom sizes are also available.

Metal vision frames are available with "Snap-On" real wood veneers that are easily stainable. They are available in Red Oak, Mahogany, Maple and Cherry to give a close match to your natural wood veneer lead lined door. All lead lined frames and x-ray lead safety glass and ceramic glazing assemblies are also available as UL fire-rated 20 minute, 60 minute and 90 minute (with size limitations).

Ray-Bar Lead Lined Astragals

Lead Lined Astragal

Ray-Bar Lead Lined Astragal

Lead Lined Astragals are utilized between a pair of lead lined doors. Ray-Bar shielded astragals are easy to install and available in standard 1/16" / 1.6mm / 4# lead lining and sized as 2" wide in galvanized primed steel, clear anodized aluminum, or 304 stainless steel with a vertical #4 brush grained finish. Higher lead shielding of Ray-Bar astragals are also available to match your doors shielding requirements.

Ray-Bar Radiation Shielded Door Thresholds

Ray-Bar Lead Lined Threshold

For floor attachment installation directly under swinging lead lined door openings to reduce radiation leakage.
Durable aluminum construction for high traffic applications.
Available in 11 standard lead shielding thickness values.(1/64" up to 1/4")
*Customer must specify the proper lead shielding thickness requirement when ordering
Standard Ray-Bar Shielded Door Threshold sizes are available 24", 36" and 48" wide.
*This product only shield against alpha,beta and x-ray gamma radiation.
*This product does not shield against thermal or fast neutrons (I.E. 18+ MeV Linear Accelerators)
Special Ray-Bar Neutron Shielded or Gamma/Neutron Shielded door thresholds are available upon request.

Please advise us of the exact lead shielding value you require.

Ray-Bar Radiation Shielded Door Sweeps

Ray-Bar Lead Lined Threshold

Easily attach directly to the bottom face of either a swinging or sliding door.
Attach to Radiation face side of door if in-swing,or opposite radiation face side if out-swing
Ray-Bar's flexible shielding material lightly brushes against the floor for a more complete radiation resistant seal
to help reduce potential radiation leakage streaming amounts that may flow under a door to floor gap.
Available in 8 standard lead shielding equivalency values.(1/64" up to 1/8")
*Customer must specify the proper lead shielding thickness equivalency requirement when ordering
Standard Ray-Bar Shielded Swinging Door Bottom Sweep sizes are available 24",3 6" and 48" wide.
Perfect for medical diagnostic x-ray or imaging rooms and radiation therapy
Standard Ray-Bar Shielded Sliding Door Bottom Sweep sizes are available 48", 60", 72", 84" and 96" wide.
Excellent for gaps under sliding doors in industrial x-ray imaging or NDT applications.
*These product only shield against alpha,beta and x-ray gamma radiation
*These products do not shield against thermal or fast neutrons (I.E. 18+ MeV Linear Accelerators)
Special Ray-Bar Neutron Shielded or Gamma/Neutron Shielded door sweeps are available upon request.

Please advise us of the exact lead shielding value you require.

Ray-Bar X-Ray Glass Shielded Peephole

Shielded Peephole

X-Ray Glass Shielded Peephole

  • Installs in minutes into existing lead door
  • Includes shielded x-ray glass
  • Provides wide panoramic view
  • Available in only 1 to 3 days

The Ray-Bar X-Ray Shielded Viewport "peephole" with x-ray lead glass provides 2mm lead equivalency and 1" diameter fisheye lens for a view of 180 degrees on x-ray imaging side. Fabricated to fit into lead lined shielded door thicknesses from 1-3/8" and up to 2-1/8" thick.

This unit fits into 9/16" drilled mounting hole at eye level and installs in minutes. UL listed for 45 minute fire-rated doors. It offers one-way operator viewing of patient and procedures while also providing patient privacy. Fabricated for installation in wood or metal shielded doors.

Ray-Bar Lead Lined Metal Door Frames

Lead Lined Door Frame

Hollow Metal Lead Lined Welded Frames

Knock-Down Lead Lined Metal Frames

  • Only offered if purchased with Ray-Bar Lead Lined Hollow Metal Doors.
  • Hollow Metal Welded Frames are 16 gauge primered steel with anchors for metal studs,wood studs or concrete "cast in place" or retro-fit bolt-anchor (Hilti) into existing concrete or masonry walls.
  • Equal rabbet or single step rabbet frame profiles can be formed to fit wall thicknesses from 5" up to 24"
  • Heavier 14 gauge or 12 gauge hollow metal frames available for higher radiation lead shielding applications.
  • Welded Frames must be installed prior to any lead backed drywall.
  • Lead Lined Welded HM frames typically available in approximately 15 to 21 working days 
  • Customer must order frames with same lead thickness as in wall or partition.
  • Customer must order frames internally lead lined on same side as radiation.
  • Available in 12 lead thickness levels of internal shielding within frame throats.
 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

  • Standard 3 Hinge and strike Layout Only
  • Knock-Down lead lined equal rabbet profile frames in 3 pieces: 1-head and 2- vertical jambs (strike side and hinge side) and available in 7 lead shielding levels.
  • Easy to install - screw into place in either wood or metal stud lead lined walls.
  • K-D Frames are Left or Right hand swing reversible, great for retro-fit applications.
  • K-D Frames are provided with durable baked on polyester enamel in 4 standard colors of Western White,BrownTone,AlumaTone and Black.
  • Frames fit standard wall thicknesses of 3-3/4",4-5/8",4-7/8",5-3/8",6-7/8" and 7-1/4".
  • AlumaTone color frames only available for 3-3/4", 4-7/8" and 7-1/4" thick walls.
  • 20 gauge frames for 3-3/4",4-5/8",4-7/8",5-3/8" and 18 gauge for 6-7/8" and 7-1/4".
  • Standard 80" and 84" high jambs,and in 36",42",48",60" and 72" widths
  • Frame jambs are standard prepared set for 3 each 4" hinges equally spaced. 
  • *Locksets and Hinges are also available for K-D frames upon request.
  • Knock-Down frames are installed after lead backed drywall is installed.
  • Lead Lined K-D frames typically available in approximately 7 to 10 working days 
  • Customer must order frames with same lead thickness as in wall or partition.
  • Customer must order frames internally lead lined on same side as radiation.
  • Available in 7 lead thickness levels of internal shielding within frame throats.

Please contact us for more information.